SCSI INITIALIZATION UTILITY FOR Netfinity 3500 servers ONLY --CONTENTS-- 1. When to use this utility 2. Directions on how to use it 1. WHEN TO USE THIS UTILITY =========================== This utility is only intended for Nefinity 3500 Servers, installing or loading NT 4.0 on a SCSI hardfile that is running off of the on board 7895, experiencing one of two possible hang conditions: 1.Scenario #1 Server Guide Install: The installation will successfully assing partitions, load appropriate files and then request a reboot. After the reboot, at the blue screen, there is no activity. The system is hung at this time. 2. Scenario #2 Diskette Install: After following the appropriate procedure that allows the proper installation of the Adaptec SCSI driver from the manufacture's diskette, the system hangs during the SCSI driver initialization, i.e. the system does not successfully load the driver. 2. DIRECTIONS ON HOW TO USE THIS UTILITY ======================================== 1. Boot to this diskette 2. At DOS prompt type "zero" 3. When Prompted to choose port, enter "0" for the appropriate port 4. After "A" prompt returns to screen, remove diskette and reboot system