IBM ThinkPad June 24, 1999 Video Capture Driver III for Windows 95/98 Version 1.13 ========================================== What This Package Does ----------------------- The accompanying Video Capture Driver Package enables and updates the video capture/overlay function in the ThinkPad system. Supported Models ---------------- - ThinkPad 770 - ThinkPad 770E, 770ED Released Versions ------------------ Version 1.13 Initial release for ThinkPad 770,770E,ED Summary of Change ----------------- Key: Package version (for example, 1.11 means Version 1.11) (New) New function or enhancement (Fix) Correction to existing function (Restrictions) Remaining restrictions <1.13> - (New) Support for ThinkPad 770,770E,770ED. Installation Guide ------------------ Note: * This driver will now automatically extract to your hard drive. It will only extract under Windows 95/98 and Windows NT. The extraction process will NOT work with any other operating system. * Use this driver package only for the ThinkPad 770, 770E, 770ED. * This driver can be installed to Windows 95/98 only. * Before installing, make sure that you have installed the following software in the computer: - Video Features Disk IV v1.32 or later for Windows 95/98 * Before installing this driver, remove the old version of the capture driver (i.e. Trident AVI Driver): - Click on 'Start' -> 'Programs' -> 'Trident AVI Driver' -> 'Remove Trident AVI Driver' 1. Start Windows 95/98. 2. Make sure that 'Trident AVI Driver' is not on the 'Programs' menu. 3. Run vctpdw9x.exe to unpack the driver files. 4. Click on 'Start' -> 'Run...' 5. Type in "x:\\SETUP.EXE". Then click on 'OK'. where x is the drive letter is the directory where the unpacked files resides. Default path is C:\DRIVERS\W9X\CAPTURE\ 6. Follow the instructions on the screen to complete the installation. Trademarks ---------- IBM and ThinkPad are trademarks of IBM Corporation. Microsoft and Windows are trademarks of Microsoft Corporation. Trident is a trademark of Trident Microsystems, Incorporated.