IBM ThinkPad 390E July 30, 1999 CardWorks for Windows 95 Version 5.50.06T3 ======================================================================== ********************************************************************** WARNING THIS DRIVER CAN ONLY BE USED WITH THE MACHINES ON THE SUPPORTED LIST ON THIS PAGE. USE OF THESE DRIVERS WITH ANY OTHER MACHINE IS STRICTLY PROHIBITED. ********************************************************************** What This Package Does ---------------------- This package provides CardWorks software for Windows 95 users. The CardWorks enables or updates the PC Card function of the following ThinkPad computer: - ThinkPad 390E To determine if you have to update the CardWorks or not, please refer to the "Summary of Changes" section. To update the CardWorks, please refer to the "Installation Guide" section. Released Versions ----------------- Version 5.50.06T1 Initial release Version 5.50.06T3 Problem fixes Summary of Changes ------------------ Where: Diskette version (For example, 1.00.0000 means Version 1.00.0000) (New) New function or enhancement (Fix) Correction to existing function <5.50.06T1> - (New) Initial release for ThinkPad 390E. <5.50.06T3> - (Fix) If a NIC (Network Interface Card) is present in the machine but is disabled in Device Manager and the internal modem is enabled, this release will stop the system from booting slowly, with stuttering sounds, and hanging. - (Fix) Error message appears when the CardWorks is uninstalled. - (Fix) The system may reboot when "Diagnostics" is run in "Modems Properties" window with a PC Card inserted. Installation Guide ------------------ 1. Start Windows 95. 2. Extract the CardWorks driver onto the hard disk. 3. Remove any PC Cards from the computer. 4. Click on 'Start' -> 'Run...'. 5. Type "C:\DRIVERS\W95\PCCARD\SETUP", then click on 'OK'. 6. Follow the instructions on the screen. 7. When the installation wizard ask: "Select the number of PC Card slots present on your machine." Choose '2 slots' and click on 'Next'. 8. Follow the instructions on the screen. 9. When prompted for the disk 2 and disk 3, click on 'OK'. Accept all defaults during CardWorks installation process. How to install when Docking Station is connected: 1. Start Windows 95. 2. Extract the CardWorks driver onto the hard disk. 3. Remove any PC Cards from the computer. 4. Click on 'Start' -> 'Run...'. 5. Type "C:\DRIVERS\W95\PCCARD\SETUP", then click on 'OK'. 6. Follow the instructions on the screen. 7. When the installation wizard ask: "Select the number of PC Card slots present on your machine." Choose "4 slots", enable "Support Docking Station" and click on 'Next'. 8. Follow the instructions on the screen. 9. When prompted for the disk 2 and disk 3, click on 'OK'. Accept all defaults during CardWorks installation process. How to uninstall: 1. Click on 'Start' -> 'Setting' -> 'Control Panel' 2. Double click on 'Add/Remove Programs'. 3. Click 'install/uninstall' tab and choose "SystemSoft CardWorks" program. 4. Click the 'Add/Remove' button. 5. Follow the direction on the screen. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Windows is a registered trademark of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.