IBM ThinkPad                                            June 30, 1997
MPEG Features Diskette for Windows 3.1 Version 1.12
===================================================

What This Diskette Does
-----------------------

The accompanying MPEG Features Diskette enables or updates the MPEG
function in the ThinkPad system.

The following models are supported:
   - ThinkPad 760ED, 760XD, 765D


Released Version
----------------

Version 1.00     Initial release for ThinkPad 760ED
Version 1.10     A fix for some problems
Version 1.11     A fix for some problems
Version 1.12     A fix for some problems


Summary of Change
-----------------
  Key: <n.nn>  Diskette version (for example, 1.00 means Version 1.00)
        (New)  New function or enhancement
        (Fix)  Correction to existing function

<1.00>
 - (New) Support for ThinkPad 760ED

<1.10>
 - (Fix) The power saving function is updated.
 - (Fix) The out-of-lip-sync problem for the PAL clip
         with irregular resolution size.
 - (Fix) MPEG video halts during chapter seek.
 - (Fix) The flashing noise in specific MPEG file play.
 - (Fix) Consumes too much conventional memory.
 - (Fix) Thermal problem.

<1.11>
 - (Fix) The system hangs in MPEG play when docked into
         the PCI docking station.

<1.12>
  - (Fix) MPEG video of a small file size cannot be played repeatedly.


Installation Guide
------------------

Notes:
   - Use this driver diskette only for the ThinkPad 760ED and 760XD.
   - Before installing, make sure that you have installed
     the following software in the computer:
        - Video Features Diskette for Windows (Version 1.10 or later)
        - Mwave DSP Features Diskette for Windows
        - Microsoft Win32s Setup Diskette
        - Video Capture Driver II for Windows 3.1
          (Version 1.11 or later)
        - Digital Video Producer (including Video for Windows run time)

 1.  Start Windows.

 2.  Select MAIN.

 3.  Select CONTROL PANEL; then select DRIVERS.

     Note: You must first uninstall previous drivers for
           the installation of the new drivers to work!
           Follow steps 4-10.

 4.  Select (MCI)CD-i/VideoCD from the list of installed drivers.
     If the driver is not there, go to step 6.

 5.  Select Remove, and then confirm by selecting YES.

 6.  Select Don't Restart Now.

 7.  Select (MCI)IBM Mpeg-2 from the list of installed drivers.
     If the driver is not there, then:
         A: If you removed a driver in steps 3-5, restart your system.
         B: Otherwise, go to step 11 and continue
            installing MPEG drivers.
 8.  Select Remove, then confirm by selecting YES.

 9.  Select Restart Now.

10.  After restarting Windows, select MAIN.

11.  Select CONTROL PANEL; then select DRIVERS to install the
     MCI drivers.

12.  Select the ADD option.

13.  Select Unlisted or Updated driver, specify the installation
     diskette path, and press Enter.

     The installation driver recognizes the (MCI)IBM MPEG-2 and
     (MCI) CD-i/VideoCD drivers.

14.  Select (MCI) CD-i/VideoCD and press OK.

15.  Select Don't Restart Now.

16.  Repeat steps 12 and 13.

17.  Select (MCI) IBM MPEG-2 and press OK.

18.  After the driver is installed, select Now to start Windows.


Trademarks
----------
IBM and ThinkPad are trademarks of IBM Corporation.
Microsoft and Windows are trademarks of Microsoft Corporation.