IBM ThinkPad November 29, 1999 Portable Drive Bay Device Drivers (Windows 95/98/NT) ======================================================================== Installation instructions ========================= Windows 95/98 Do not have the PC Card installed in the system at this time. 1. Download the file to the hard disk. 2. Double-click on the file to extract it to the hard drive (the default directory is C:\DRIVERS\WIN\PORTBAY). 3. Insert the PC Card for the Portable Drive Bay. After the Hardware Wizard detects new hardware it will prompt you for the drivers for the new device. Change the location to C:\DRIVERS\WIN\PORTBAY (or the custom location the drivers were extracted to). 4. After the drivers are installed, it will prompt you to restart the system. Make sure there are no programs running, remove any diskettes from the floppy drive, and click "Yes" to restart the computer. Windows NT 1. Download the file to the hard disk. 2. Double-click on the file to extract it to the hard drive (the default directory is C:\DRIVERS\WIN\PORTBAY). 3. Click on "Start -> Settings -> Control Panel -> SCSI Adapters". 4. Click on "Add". Be sure to change the location where Windows NT will look for the driver. Change the location to C:\DRIVERS\WIN\PORTBAY (or the custom location the drivers were extracted to). 5. Select "IBM Portable Drive Bay" and click "OK". 6. When prompted for the location of the drivers, change the location to C:\DRIVERS\WIN\PORTBAY\WINNT (or the custom location the drivers were extracted to). 7. After the drivers are installed, it will prompt you to restart the system. Make sure there are no programs running, remove any diskettes from the floppy drive, and click "Yes" to restart the computer.