; $Revision: 1.2 $ ; $Date: 26 Jun 1989 11:29:50 $ ; ; *************************************************************************** ; * Copyright (C) 1988 by Phoenix Technologies Ltd. This program * ; * contains proprietary and confidential information. All rights reserved * ; * except as may be permitted by prior written consent. * ; *************************************************************************** AdapterId 8087h AdapterName "Internal Options" ; This is irrelevant but must be present for the parser NumBytes 0 ; *********************************************************** NamedItem Cmos 0h MemInst Prompt "Installed memory" Choice "16384 KB (16.0 MB)" pos[0]=XXXXXXXXb Help " This is the amount of physically installed memory. It cannot be changed in this program." ; *********************************************************** NamedItem Cmos 0h MemAvail Prompt "Available memory" Choice "16384 KB (16.0 MB)" pos[0]=XXXXXXXXb Help " This is the amount of memory that passed parity checking during power-on. It cannot be changed in this program." PSignature NamedItem ECmos 703h Prompt "System Speed" Choice "Fast" pos[0]=XXXXX000b Choice "Internal Cache Off" pos[0]=XXXXX010b Choice "External Cache Off" pos[0]=XXXXX100b Choice "Medium" pos[0]=XXXXX110b Choice "Slow" pos[0]=XXXXX111b Help "Chose one of the speed settings listed, generally should be selected unless you are having problems with applications executing too fast. Speed definitions are as follows:  -- Fast ---- 25 Mhz 80486 performance.  -- Internal Cache Off ---- Used for software testing.  -- External Cache Off ---- Used for external cache failures.  -- Medium -- 16 Mhz 80386 performance.  -- Slow ----- 8 Mhz 80286 performance." ; *********************************************************** PSignature NamedItem ECmos 704h Prompt "Maximum Memory Limit" Choice "No Limit" pos[0]=XXXXXXX0b Choice "16 MB Limit" pos[0]=XXXXXXX1b Help "Chose unless you are running which does not recognize memory above the 16MB boundry." ; *********************************************************** NamedItem Cmos 10h Diskette Prompt "Disk Drive A Type" Choice "1.44MB 3.5 Inch" pos[0]=0100XXXXb Choice "720KB 3.5 Inch" pos[0]=0011XXXXb Choice "360KB 5.25 Inch" pos[0]=0001XXXXb Choice "1.2MB 5.25 Inch" pos[0]=0010XXXXb Choice "Not Installed" pos[0]=0000XXXXb Help "Select one of the choices listed for drive A. Use the F5 (Previous) or F6 (Next) keys to change the drive type." ; *********************************************************** NamedItem Cmos 10h Diskette Prompt "Disk Drive B Type" Choice "Not Installed" pos[0]=XXXX0000b Choice "1.44MB 3.5 Inch" pos[0]=XXXX0100b Choice "720KB 3.5 Inch" pos[0]=XXXX0011b Choice "360KB 5.25 Inch" pos[0]=XXXX0001b Choice "1.2MB 5.25 Inch" pos[0]=XXXX0010b Help "Select one of the choices listed for drive B. Use the F5 (Previous) or F6 (Next) keys to change the drive type." ; *********************************************************** NamedItem Cmos 14h Math Prompt "Math Coprocessor" Choice "- 80x87 chip -" pos[0]=XXXXXXXXb Help "Your computer has a built in math coprocessor socket to hold a math coprocessor chip. It cannot be changed prior to its physical installation and detection." ; ****************************************************************** ; Cmos offset 31 (System Board POS 2) ; Bit 3 - 0 = Serial port 1 enabled. ; - 1 = Serial port 2 enabled. ; Bit 2 - 0 = Serial port disabled. ; - 1 = Serial port enabled. ; Bit 0 - 0 = Override bits 4,2,1 to disable the ports. ; - 1 = Enable the state of bits 4,2,1. ; ****************************************************************** NamedItem Cmos 31h Board Prompt "Serial Port" Choice "SERIAL_1" pos[0]=XXXX1111b io 03f8h-03ffh int 4 Choice "SERIAL_2" pos[0]=XXXX0111b io 02f8h-02ffh int 3 Choice "Disabled" pos[0]=XXXXX011b Help "The built-in serial port can be assigned as Serial port 1, Serial port 2, or disabled. Use the F5 (Previous) or F6 (Next) keys to change the serial port." ; ****************************************************************** ; Cmos offset 31 (System Board POS 2) ; Bit 7 - 0 = 8 bit bidrectional mode. ; 1 = bidirectional mode disabled. ; Bit 6,5 - 0,0 = Parallel 1 ; - 0,1 = Parallel 2 ; - 1,0 = Parallel 3 ; - 1,1 = Reserved ; Bit 4 - 0 = Parallel port disabled. ; - 1 = Parallel port enabled. ; Bit 0 - 0 = Override bits 4,2,1 to disable the ports and diskette. ; - 1 = Enable the state of bits 4,2,1. ; ****************************************************************** NamedItem Cmos 31h Prompt "Parallel Port" Choice "PARALLEL_1" pos[0]=1001XX11b io 03bch-03beh int 7 Choice "PARALLEL_2" pos[0]=1011XX11b io 0378h-037ah int 7 Choice "PARALLEL_3" pos[0]=1101XX11b io 0278h-027ah int 7 Choice "PARALLEL_1 bidirectional" pos[0]=0001XX11b io 03bch-03beh int 7 Choice "PARALLEL_2 bidirectional" pos[0]=0011XX11b io 0378h-037ah int 7 Choice "PARALLEL_3 bidirectional" pos[0]=0101XX11b io 0278h-027ah int 7 Choice "Disabled" pos[0]=XXX0XX11b Help "The built-in parallel port can be assigned as Parallel port 1, 2 or 3 or disabled entirely. In addition the port can be configured as an 8-bit bidirectional interface. Use the F5 (Previous) or F6 (Next) keys to change the parallel port." ; Reserve a group of resources for the system board FixedResources NoDisplay pos[0]=xxxxxxxxb ; DMA, Keyboard, CMOS/NMI, Math Coproc, Interrupt Controller, etc IO 01h-0108h ; Video IO 03c0h-03dfh ; Diskette IO 03f0h-03f7h ; Diskette Arbitration ARB 2