; $Revision: 1.2 $ ; $Date: 26 Jun 1989 11:29:50 $ ; ; *************************************************************************** ; * Copyright (C) 1988 by Phoenix Technologies Ltd. This program * ; * contains proprietary and confidential information. All rights reserved * ; * except as may be permitted by prior written consent. * ; *************************************************************************** AdapterId 7511h AdapterName "Internal Options" ; This is irrelevant but must be present for the parser NumBytes 0 ; *********************************************************** NamedItem Cmos 0h MemInst Prompt "Installed memory" Choice "16384 KB (16.0 MB)" pos[0]=XXXXXXXXb Help " This is the amount of physically installed memory. It cannot be changed in this program." ; *********************************************************** NamedItem Cmos 0h MemAvail Prompt "Available memory" Choice "16384 KB (16.0 MB)" pos[0]=XXXXXXXXb Help " This is the amount of memory that passed parity checking during power-on. It cannot be changed in this program." ; *********************************************************** NamedItem Cmos 10h Diskette Prompt "Disk Drive A Type" Choice "1.44MB 3.5 Inch" pos[0]=0100XXXXb Choice "720KB 3.5 Inch" pos[0]=0011XXXXb Choice "360KB 5.25 Inch" pos[0]=0001XXXXb Choice "1.2MB 5.25 Inch" pos[0]=0010XXXXb Choice "Not Installed" pos[0]=0000XXXXb Help "Select one of the choices listed for drive A. Use the F5 (Previous) or F6 (Next) keys to change the drive type." ; *********************************************************** NamedItem Cmos 10h Diskette Prompt "Disk Drive B Type" Choice "Not Installed" pos[0]=XXXX0000b Choice "1.44MB 3.5 Inch" pos[0]=XXXX0100b Choice "720KB 3.5 Inch" pos[0]=XXXX0011b Choice "360KB 5.25 Inch" pos[0]=XXXX0001b Choice "1.2MB 5.25 Inch" pos[0]=XXXX0010b Help "Select one of the choices listed for drive B. Use the F5 (Previous) or F6 (Next) keys to change the drive type." ; *********************************************************** NamedItem Cmos 14h Math Prompt "Math Coprocessor" Choice "- 80x87 chip -" pos[0]=XXXXXXXXb Help "Your computer has a built in math coprocessor socket to hold a math coprocessor chip. It cannot be changed prior to its physical installation and detection." ; ****************************************************************** ; Cmos offset 31 (System Board POS 2) ; Bit 3 - 0 = Serial port 1 enabled. ; - 1 = Serial port 2 enabled. ; Bit 2 - 0 = Serial port disabled. ; - 1 = Serial port enabled. ; Bit 0 - 0 = Override bits 4,2,1 to disable the ports. ; - 1 = Enable the state of bits 4,2,1. ; ****************************************************************** NamedItem Cmos 31h Board Prompt "Serial Port" Choice "SERIAL_1" pos[0]=XXXX1111b io 03f8h-03ffh int 4 Choice "SERIAL_2" pos[0]=XXXX0111b io 02f8h-02ffh int 3 Choice "Disabled" pos[0]=XXXXX011b Help "The built-in serial port can be assigned as Serial port 1, Serial port 2, or disabled. Use the F5 (Previous) or F6 (Next) keys to change the serial port." ; ****************************************************************** ; Cmos offset 31 (System Board POS 2) ; Bit 7 - 0 = 8 bit bidrectional mode. ; 1 = bidirectional mode disabled. ; Bit 6,5 - 0,0 = Parallel 1 ; - 0,1 = Parallel 2 ; - 1,0 = Parallel 3 ; - 1,1 = Reserved ; Bit 4 - 0 = Parallel port disabled. ; - 1 = Parallel port enabled. ; Bit 0 - 0 = Override bits 4,2,1 to disable the ports and diskette. ; - 1 = Enable the state of bits 4,2,1. ; ****************************************************************** NamedItem Cmos 31h Prompt "Parallel Port" Choice "PARALLEL_1" pos[0]=1001XX11b io 03bch-03beh int 7 Choice "PARALLEL_2" pos[0]=1011XX11b io 0378h-037ah int 7 Choice "PARALLEL_3" pos[0]=1101XX11b io 0278h-027ah int 7 Choice "PARALLEL_1 bidirectional" pos[0]=0001XX11b io 03bch-03beh int 7 Choice "PARALLEL_2 bidirectional" pos[0]=0011XX11b io 0378h-037ah int 7 Choice "PARALLEL_3 bidirectional" pos[0]=0101XX11b io 0278h-027ah int 7 Choice "Disabled" pos[0]=XXX0XX11b Help "The built-in parallel port can be assigned as Parallel port 1, 2 or 3 or disabled entirely. In addition the port can be configured as an 8-bit bidirectional interface. Use the F5 (Previous) or F6 (Next) keys to change the parallel port." PSignature NamedItem ECmos 703h Prompt "System Speed" Choice "Fast" pos[0]=XXXXXXX0b Choice "Slow" pos[0]=XXXXXXX1b Help "This option is only valid if your Processor module is equipped with Cache, e.g., 486 with internal cache or 386 with external Cache. Choose one of the speed settings listed, generally should be selected unless you are having problems with applications executing too fast. Speed definitions are as follows:  -- Fast ---- Normal Operation with Cache Enabled  -- Slow ---- Normal Operation with Cache Disabled " ; *********************************************************** PSignature NamedItem ECmos 705h Prompt "Internal Imbedded Hard Disk" Choice "Enabled" pos[0]=XXXXXXX1b Choice "Disabled" pos[0]=XXXXXXX0b Help "Choose if you want to use the imbedded hard disk on the mother board. Else use for any Micro Channel Hard Disk Controller." PSignature NamedItem ECmos 706h Prompt "Interrupt Level" Choice "INT 14" pos[0]=XXXXXXX0b int 14 Choice "INT 15" pos[0]=XXXXXXX1b int 15 Help "If the Internal Hard Drive is enabled, you must choose the interrupt level for the drive to interrupt the system. Default condition is . This option is ignored if the Internal Hard Drive is not selected." PSignature NamedItem ECmos 706h Prompt "Adapter I/O Address" Choice "I/O Address 01F0h-01FFh" pos[0]=XXXXX00Xb io 01F0h-01FFh Choice "I/O Address 11F0h-11FFh" pos[0]=XXXXX01Xb io 11F0h-11FFh Choice "I/O Address 21F0h-21FFh" pos[0]=XXXXX10Xb io 21F0h-21FFh Choice "I/O Address 31F0h-31FFh" pos[0]=XXXXX11Xb io 31F0h-31FFh Help "If the Internal Hard Drive is enabled, you must choose the I/O location for the drive to interface to the system. There are four possible I/O spaces. Under normal circumstances, select . This option is ignored if the Internal Hard Drive is not selected." PSignature NamedItem ECmos 706h Prompt "Automatic Insertion of AT Drive Type" Choice "No" pos[0]=XXXX0XXXb Choice "Yes" pos[0]=XXXX1XXXb Help "If the Internal Hard Drive is selected and you choose to run Xenix or Novell, you must enable the Automatic Insertion of Drive Type for the device drivers under these two Operating Systems to recognize the drive. For others OS, Automatic Insertion is not needed." PSignature NamedItem ECmos 704h Prompt "Maximum Memory Limit" Choice "No Limit" pos[0]=XXXXXXX0b Choice "16 MB Limit" pos[0]=XXXXXXX1b Help "Chose unless you are running which does not recognize memory above the 16MB boundry." ; Reserve a group of resources for the system board FixedResources NoDisplay pos[0]=xxxxxxxxb ; DMA, Keyboard, CMOS/NMI, Math Coproc, Interrupt Controller, etc IO 01h-0108h ; Video IO 03c0h-03dfh ; Diskette IO 03f0h-03f7h ; Diskette Arbitration ARB 2