AdapterID 06901h AdapterName "FAX MODEM" NumBytes 4 fixedresources pos[2]=11111111b pos[3]=110XXXXXb nameditem Prompt "FAX MODEM BASE IO Address Location" Choice "Address Segment 0440h" pos[1]=XXXXX000b io 0440h-0047fh Choice "Address Segment 0C40h" pos[1]=XXXXX001b io 0c40h-0c7fh Choice "Address Segment 1440h" pos[1]=XXXXX010b io 1440h-147fh Choice "Address Segment 2440h" pos[1]=XXXXX011b io 2440h-247fh Choice "Address Segment 4440h" pos[1]=XXXXX100b io 4440h-447fh Choice "Address Segment 8440h" pos[1]=XXXXX101b io 8440h-847fh Help "There are six possible address assigments in the I/O space area for the FAX Modem Adaptor. The addressing range for each address segment is 64 byte. The start addresses for the six possible segments are 0440h, 0C40h, 1440h, 2400h, 4440h and 8440h. Use F5 = Previous and the F6 = Next keys to change address selection. Under normal situation, select ." nameditem Prompt "Interrupt Level Selection" Choice "INT LEVEL 3" pos[1] = X0001XXXb Choice "INT LEVEL 5" pos[1] = X0010XXXb Choice "INT LEVEL 7" pos[1] = X0100XXXb Choice "INT LEVEL 9" pos[1] = X1000XXXb Help "This is the interrupt level selection. The interrupt levels are prioritized and the priority sequence is 9, 3, 5, 7. Interrupt level 9 has the highest priority and level 7 has the lowest. Conflicting assigments are marked with an asterisk and must be changed. Use the F5 = Previous and the F6 = Next keys to change interrupt level assigments. Under normal situation, select ." nameditem Prompt "DMA Arbitration Level Selection" Choice "Level 0" pos[3]=XXXX0000b arb 0 Choice "Level 1" pos[3]=XXXX0001b arb 1 Choice "Level 2" pos[3]=XXXX0010b arb 2 Choice "Level 3" pos[3]=XXXX0011b arb 3 Choice "Level 4" pos[3]=XXXX0100b arb 4 Choice "Level 5" pos[3]=XXXX0101b arb 5 Choice "Level 6" pos[3]=XXXX0110b arb 6 Choice "Level 7" pos[3]=XXXX0111b arb 7 Help "This assignment need only be changed if it is in conflict with another assigment. Conflicting assigments are marked with an asterisk. Use the F5 = Previous and the F6 = Next keys to change arbitration level assigments. Using arbitration levels, this adapter accesses memory directly without burdening the computer's main processor. An aribitration level of 0 has the highest priority, and increasing levels have the corresponing decreased priority. Under normal situation, select ." nameditem Prompt "Select DMA Fairness" Choice "Select DMA Fairness" pos[3]=XXX1XXXXb Choice "Do Not Select DMA Fairness" pos[3]=XXX0XXXXb Help "The Fairness allows the system to service all arbitrating devices on the Micro channel in order of priority before the same device can gain control of the Micro-channel again. Under normal situation, select "