; @6406.ADF Ver 1.00 ; ; file @6406.ADF used to configure the ; Extended TTY 8 Port Controller Card AdapterId 06406h AdapterName "AT&T GIS 8 Port Serial Controller/MC" NumBytes 3 FixedResources pos[0]=xxxxxxxxb pos[1]=xxxxxxxxb pos[2]=xxxxxxxxb NamedItem Prompt "Dual Port Address" choice "0D0000H" pos[2]=xx110100b MEM 0d0000h-0d3fffh choice "0D4000H" pos[2]=xx110101b MEM 0d4000h-0d7fffh choice "0D8000H" pos[2]=xx110110b MEM 0d8000h-0dbfffh choice "0DC000H" pos[2]=xx110111b MEM 0dc000h-0dffffh choice "0C0000H" pos[2]=xx110000b MEM 0c0000h-0c3fffh choice "0C4000H" pos[2]=xx110001b MEM 0c4000h-0c7fffh choice "0C8000H" pos[2]=xx110010b MEM 0c8000h-0cbfffh choice "0CC000H" pos[2]=xx110011b MEM 0cc000h-0cffffh Help "This selects the address of this controller's dual port RAM. Under normal circumstances, select <0D0000H>. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "I/O Address" choice "0800H" pos[1]=xx000010b IO 0800h-0bffh choice "0C00H" pos[1]=xx000011b IO 0C00h-0fffh choice "1000H" pos[1]=xx000100b IO 1000h-13ffh choice "1400H" pos[1]=xx000101b IO 1400h-17ffh choice "1800H" pos[1]=xx000110b IO 1800h-1bffh choice "1c00H" pos[1]=xx000111b IO 1c00h-1fffh choice "2000H" pos[1]=xx001000b IO 2000h-23ffh Help "This selects the address of this controller's I/O register. Under normal circumstances, select <0800H>. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "Interrupt Level" choice "IRQ 3 " pos[0]=xxxx000xb INT 3 choice "IRQ 4 " pos[0]=xxxx001xb INT 4 choice "IRQ 5 " pos[0]=xxxx010xb INT 5 choice "IRQ 7 " pos[0]=xxxx011xb INT 7 choice "IRQ 9 " pos[0]=xxxx100xb INT 9 choice "IRQ 10" pos[0]=xxxx101xb INT 10 choice "IRQ 11" pos[0]=xxxx110xb INT 11 choice "IRQ 12" pos[0]=xxxx111xb INT 12 Help "This item specifies at which IRQ level the controller will interrupt the host. Under normal cicumstances,select . Ensure the selected IRQ level does not conflict with another device." ;end of file