;Future Domain Corporation ;ADF File for MCS-600/700 board (TMC-1800 VLSI) ;Version 1.1 ; AdapterID 06127h AdapterName "Future Domain SCSI Adapter" NumBytes 1 nameditem Prompt "Adapter Memory Location" Choice "Segment CA00" pos[0]=01xxxxxxb mem 0ca000h-0cbfffh Choice "Segment CE00" pos[0]=10xxxxxxb mem 0ce000h-0cffffh Choice "Segment DE00" pos[0]=11xxxxxxb mem 0de000h-0dffffh Choice "Segment C800" pos[0]=00xxxxxxb mem 0c8000h-0c9fffh Help "To configure this adapter you must choose the memory location the adapter will use for it's BIOS ROM. There are four memory locations that may be selected from. Under normal circumstances, select (Segment CE00). If a conflict occurs, choose another memory location." nameditem Prompt "Adapter I/O Location" Choice "0140" pos[0]=xx00xxxxb io 0140h-014fh Choice "0150" pos[0]=xx01xxxxb io 0150h-015fh Choice "0160" pos[0]=xx10xxxxb io 0160h-016fh Choice "0170" pos[0]=xx11xxxxb io 0170h-017fh Help "Choose the I/O location the adapter will use. There are four I/O locations that may be selected from. Under normal circumstances, select (0150). I a conflict occurs, choose another I/O location." nameditem Prompt "Select Interrupt Line" Choice "Interrupt 5 (Reserved)" pos[0]=xxxx001xb int 5 Choice "Interrupt 10 (Reserved)" pos[0]=xxxx010xb int 10 Choice "Interrupt 11 (Reserved)" pos[0]=xxxx011xb int 11 Choice "Interrupt 12 (Mouse)" pos[0]=xxxx100xb int 12 Choice "Interrupt 14 (Fixed Disk)" pos[0]=xxxx101xb int 14 Choice "Interrupt 15 (Reserved)" pos[0]=xxxx110xb int 15 Choice "Interrupt 3 (Serial Alternate)" pos[0]=xxxx000xb int 3 Choice "Interrupts Disabled" pos[0]=xxxx111xb Help "Select the interrupt to be used by the SCSI controller. The system interrupt assignment is given in parentheses to help in a selection that will not interfere with other equipment installed in your PS2 system. Under normal circumstances, select (Int 10). If a conflict occurs, choose another Interrupt Line."