AdapterId 57FEh

AdapterName "Micro Channel Tape Drive Host Adapter"

NumBytes 3

NamedItem

        Prompt "Host Adapter I/O Base Address"
choice " 302" pos[0]=0000001Xb pos[1]=00000011b io 00302h-00303h
choice " 304" pos[0]=0000010Xb pos[1]=00000011b io 00304h-00305h
choice " 306" pos[0]=0000011Xb pos[1]=00000011b io 00306h-00307h
choice " 308" pos[0]=0000100Xb pos[1]=00000011b io 00308h-00309h
choice " 280" pos[0]=1000000Xb pos[1]=00000010b io 00280h-00281h
choice " 282" pos[0]=1000001Xb poselect an alternative level."


NamedItem
      Prompt "Fairness"
      choice "Fairness Enabled"    pos[1]=XXX1XXXXb
      choice "Fairness Disabled"   pos[1]=XXX0XXXXb

  Help
"If 'Fairness' is enabled, the NCR SCSI Adapter will not compete
for the channel during the next arbitration phase if it is currently
in control of the channel.  This allows other installed adapters
to obtain the channel in the next sequence based on each adapter's
assigned priority level.  When 'Fairness' is disabled, the adapter
will compete for every arbitration phase and will obtain more than
its fair share of channel usage.  We recommend you use 'Fairness 
Enabled' for all adapters."

NamedItem
  Prompt "Preempt Count Select"
      choice "7 Bytes"    pos[1]=X11XXXXXb

  Help
"When the NCR SCSI Adapter detects that another adapter requires 
use of the channel, the Preempt Count feature is activated.  The 
Preempt Count is the maximum number of bytes to transfer before 
yielding control of the channel.  The Adapter will always transfer 
a maximum of 7 bytes before relinquishing control of the channel."


NamedItem
   Prompt "Static Ram Starting Address"
	choice "C8000h-C87FFh"	pos[3]=1XXXX000b  mem 0C8000h-0C87FFh
	choice "CC000h-CC7FFh"	pos[3]=1XXXX001b  mem 0CC000h-0CC7FFh
	choice "D0000h-D07FFh"	pos[3]=1XXXX010b  mem 0D0000h-0D07FFh
	choice "D4000h-D47FFh"	pos[3]=1XXXX011b  mem 0D4000h-0D47FFh
	choice "D8000h-D87FFh"	pos[3]=1XXXX100b  mem 0D8000h-0D87FFh
	choice "DC000h-DC7FFh"	pos[3]=1XXXX101b  mem 0DC000h-0DC7FFh
   Help
"Set the Static Ram Starting Address to avoid conflict with other
adapters which use the extended ROM area for ROM or RAM.  The 
default is C8000h."


NamedItem
   Prompt "Host Adapter Board Logical ID"
	choice "7"		pos[3]=1X1XXXXXb
	choice "6"		pos[3]=1X0XXXXXb

Help
   "Set the Host Adapter Board Logical ID to avoid conflict when
   performing adapter to adapter I/O.  The default is 7."
OÝOÞOßOàOáOâOãOäOåOæOçOèOéOêOëOìOíOîOïOðOñOòOóOôOõOöO÷OøOùOúOûOüOýOþOÿO Por F6 (for next) function key to assign 
a different value. An * (asterisk) will appear beside 
the setting when it conflicts with another device on 
your system. You can scroll through the configuration 
menu to locate other devices configured on your system
and the DMA channels in use."
