;*************************************************************************** ;* Copyright (C) 1990 by NCR Corporation * ;* This Program contains proprietary and confidential information. All * ;* rights reserved except as may be permitted by prior written consent. * ;*************************************************************************** AdapterId 00300h AdapterName "NCR SIMPL SCSI Host Adapter Board" NumBytes 4 NamedItem Prompt "BIOS Disk Driver Enable" choice "Enable Driver" pos[0]=1XXXXXXXb choice "Disable Driver" pos[0]=0XXXXXXXb Help "The BIOS Disk Driver may be disabled if desired. The BIOS Disk Driver will map up to two SCSI drives in the system. If you do not want this to happen, you should disable the BIOS Disk Driver. The BIOS Disk Driver should be disabled when using downloadable disk drivers." NamedItem Prompt "BIOS Boot Drive" choice "SCSI drives at end of BIOS chain" pos[0]=X0XXXXXXb choice "One SCSI drive at BIOS chain start" pos[0]=X1XXXXXXb Help "If the BIOS Disk Driver is enabled, one SCSI drive can be inserted at the head of the BIOS drive chain." NamedItem Prompt "Host Adapter Board Interrupt Level" choice "INT Level 10" pos[0]=XX01XXXXb INT 10 choice "INT Level 11" pos[0]=XX10XXXXb INT 11 choice "INT Level 14" pos[0]=XX11XXXXb INT 14 choice "INT Level 5" pos[0]=XX00XXXXb INT 5 Help "Set the Host Adapter Interrupt Level so it will have minimal conflict with other interrupting devices." NamedItem Prompt "I/O Address Select" choice "400" pos[1]=00000100b io 00400h-004FFh choice "500" pos[1]=00000101b io 00500h-005FFh choice "900" pos[1]=00001001b io 00900h-009FFh choice "D00" pos[1]=00001101b io 00D00h-00DFFh choice "2400" pos[1]=00100100b io 02400h-024FFh choice "2F00" pos[1]=00101111b io 02F00h-02FFFh choice "7000" pos[1]=01110000b io 07000h-070FFh choice "8000" pos[1]=10000000b io 08000h-080FFh choice "8100" pos[1]=10000001b io 08100h-081FFh choice "8200" pos[1]=10000010b io 08200h-082FFh choice "8300" pos[1]=10000011b io 08300h-083FFh choice "8F00" pos[1]=10001111b io 08F00h-08FFFh choice "AF00" pos[1]=10101111b io 0AF00h-0AFFFh choice "E600" pos[1]=11100110b io 0E600h-0E6FFh choice "F000" pos[1]=11110000b io 0F000h-0F0FFh choice "FE00" pos[1]=11111110b io 0FE00h-0FEFFh Help "The adapter may be set up to any one of the I/O Addresses listed. If your selected address conflicts with with an I/O address already assigned, it will be marked with an asterisk and you must select another address." NamedItem Prompt "Memory Address Select" choice "C0000H" pos[2]=X0000XXXb mem 0C0000h-0C3FFFh choice "C4000H" pos[2]=X0010XXXb mem 0C4000h-0C7FFFh choice "C8000H" pos[2]=X0100XXXb mem 0C8000h-0CBFFFh choice "CC000H" pos[2]=X0110XXXb mem 0CC000h-0CFFFFh choice "D0000H" pos[2]=X1000XXXb mem 0D0000h-0D3FFFh choice "D4000H" pos[2]=X1010XXXb mem 0D4000h-0D7FFFh choice "D8000H" pos[2]=X1100XXXb mem 0D8000h-0DBFFFh choice "DC000H" pos[2]=X1110XXXb mem 0DC000h-0DFFFFh Help "Select the desired Channel BIOS ROM size with a starting address that avoids conflict with other adapters. If your selected address conflicts with with a memory address already assigned, it will be marked with an asterisk and you must select another address." NamedItem Prompt "Micro Channel Parity Support" choice "Parity Enabled" pos[2]=XXXXXX1Xb choice "Parity Disabled" pos[2]=XXXXXX0Xb Help "You may select whether or not the board will generate/check parity on the Micro Channel bus. If the system does not support parity, this option should be DISABLED. Enabling parity also enables the Selected Feedback Return option of Micro Channel. This requires the -SFDBRTN signal be supported in the system." NamedItem Prompt "Micro Channel Streaming Support" choice "Streaming Enabled" pos[2]=XXXXXXX1b choice "Streaming Disabled" pos[2]=XXXXXXX0b Help "You may select whether the board will perform Micro Channel data streaming. If the system does not support data streaming, this option should be DISABLED." NamedItem Prompt "Arbitration Level Select" choice "Arbitration Level 4" pos[3]=XXXX0100b arb 4 choice "Arbitration Level 3" pos[3]=XXXX0011b arb 3 choice "Arbitration Level 2" pos[3]=XXXX0010b arb 2 choice "Arbitration Level 1" pos[3]=XXXX0001b arb 1 choice "Arbitration Level 0" pos[3]=XXXX0000b arb 0 choice "Arbitration Level 5" pos[3]=XXXX0101b arb 5 choice "Arbitration Level 6" pos[3]=XXXX0110b arb 6 choice "Arbitration Level 7" pos[3]=XXXX0111b arb 7 choice "Arbitration Level 8" pos[3]=XXXX1000b arb 8 choice "Arbitration Level 9" pos[3]=XXXX1001b arb 9 choice "Arbitration Level 10" pos[3]=XXXX1010b arb 10 choice "Arbitration Level 11" pos[3]=XXXX1011b arb 11 choice "Arbitration Level 12" pos[3]=XXXX1100b arb 12 choice "Arbitration Level 13" pos[3]=XXXX1101b arb 13 choice "Arbitration Level 14" pos[3]=XXXX1110b arb 14 choice "Arbitration Level 15" pos[3]=XXXX1111b arb 15 Help "Select the arbitration level of the adapter when it is competing for the system channel. Each arbitration level has a corresponding priority level; the lower the arbitration level, the higher the priority. If your selection conflicts with an arbitration level already assigned in the system, it will be marked with an asterisk and you must select an alternative level." NamedItem Prompt "Host Adapter Board SCSI Device ID" choice "7" pos[0]=XXXX111Xb choice "6" pos[0]=XXXX110Xb choice "5" pos[0]=XXXX101Xb choice "4" pos[0]=XXXX100Xb choice "3" pos[0]=XXXX011Xb choice "2" pos[0]=XXXX010Xb choice "1" pos[0]=XXXX001Xb choice "0" pos[0]=XXXX000Xb Help "Set the Host Adapter SCSI Device ID to avoid conflict with other devices connected to it. If the board has two SCSI channels, both will use the same device ID on their respective SCSI bus" NamedItem Prompt "Fairness" choice "Fairness Enabled" pos[3]=X100XXXXb choice "Fairness Disabled" pos[3]=X101XXXXb Help "If 'Fairness' is enabled, the host adapter will not compete for the channel during the next arbitration phase if it is currently in control of the channel. This allows other installed adapters to obtain the channel in the next sequence based on each adapter's assigned priority level. When 'Fairness' is disabled, the adapter will compete for every arbitration phase and will obtain more than its fair share of channel usage. We recommend you use 'Fairness Enabled' for all adapters."