; ; $Revision: 1.1 $ ; $Date: 29 Sep 1988 11:06:18 $ ; ;*************************************************************************** ;* Copyright (C) 1988 by Phoenix Technologies Ltd. This program * ;* contains proprietary and confidential information. All rights reserved * ;* except as may be permitted by prior written consent. * ;*************************************************************************** ; @0012.ADF ; This file contains the Hardware test features for the C&T280 chipset. AdapterId 0012h AdapterName " C&T Internal Features " NumBytes 0 NamedItem Cmos 42h ChipReg 8Eh Prompt "Processor clock speed" Choice "25 MHz 8Eh - 00XXXX10" pos[0]=00XXXX10b Choice "20 MHz 8Eh - 00XXXX01" pos[0]=00XXXX01b Choice "16 MHz 8Eh - 00XXXX00" pos[0]=00XXXX00b Help "Processor clock speed." NamedItem Cmos 42h ChipReg 8Eh Prompt "On board peripheral wait states" Choice "4 8Eh - 00XX11XX" pos[0]=00XX11XXb Choice "3 8Eh - 00XX10XX" pos[0]=00XX10XXb Choice "2 8Eh - 00XX01XX" pos[0]=00XX01XXb Choice "1 8Eh - 00XX00XX" pos[0]=00XX00XXb Help "Each wait state is 125ns at 16Mhz, 100ns at 20Mhz, and 120ns at 25Mhz for the CPU, DMA and Master cycles. This controls the wait states for accesses made to the Interrupt Controller, Real Time Clock, Keyboard Controller, Floppy Disk Controller, Serial Port, CMOS SRAM, and the Timer." NamedItem Cmos 42h ChipReg 8Eh Prompt "80387 ND Processor" Choice "Absent 8Eh - 00X0XXXX" pos[0]=00X0XXXXb Choice "Present 8Eh - 00X1XXXX" pos[0]=00X1XXXXb Help "This indicates the presence or absence of an 80387 Numeric Processor after power up." NamedItem Cmos 42h ChipReg 8Eh Prompt "Math Ready control" Choice "82C321 8Eh - 000XXXXX" pos[0]=000XXXXXb Choice "NDP 8Eh - 001XXXXX" pos[0]=001XXXXXb Help "If set to NDP then the 80387 generates the Math Ready. If set to 82C321, the 82C321 generates the Math Ready signal." NamedItem Cmos 43h ChipReg 8Fh Prompt "Matched memory cycle" Choice "Default 8Fh - 00000XX0" pos[0]=00000XX0b Choice "Fast 8Fh - 00000XX1" pos[0]=00000XX1b Help "The Default (0) is 187.5ns cycles at 16Mhz, 200ns cycles at 20 and 25Mhz. When set to one, the cycles are 187.5ns at 16Mhz, 150ns at 20Mhz and 160 at 25Mhz." NamedItem Cmos 43h ChipReg 8Fh Prompt "Fast VGA cycle" Choice "Disabled 8Fh - 00000X0X" pos[0]=00000X0Xb Choice "Enabled 8Fh - 00000X1X" pos[0]=00000X1Xb Help "The fast VGA cycle may be extended by using CHRDY. The default is disabled." NamedItem Cmos 43h ChipReg 8Fh Prompt "Data Ready Extend" Choice "Disabled 8Fh - 000000XX" pos[0]=000000XXb Choice "Enabled 8Fh - 000001XX" pos[0]=000001XXb Help "When enabled, one wait state is inserted after the 82C321 samples CHRDY active. It provides extended data set-up time for read cycles only." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 00000h-1FFFFh is on" Choice "System Board B4h - XXXXXXX1" pos[0]=XXXXXXX1b Choice "I/O Channel B4h - XXXXXXX0" pos[0]=XXXXXXX0b Help "No help is available on this item." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 20000h-3FFFFh is on" Choice "System Board B4h - XXXXXX1X" pos[0]=XXXXXX1Xb Choice "I/O Channel B4h - XXXXXX0X" pos[0]=XXXXXX0Xb Help "No help is available on this item." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 40000h-5FFFFh is on" Choice "System Board B4h - XXXXX1XX" pos[0]=XXXXX1XXb Choice "I/O Channel B4h - XXXXX0XX" pos[0]=XXXXX0XXb Help "No help is available on this item." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 60000h-7FFFFh is on" Choice "System Board B4h - XXXX1XXX" pos[0]=XXXX1XXXb Choice "I/O Channel B4h - XXXX0XXX" pos[0]=XXXX0XXXb Help "No help is available on this item." NamedItem Cmos 44h ChipReg B4h Prompt "RAM at 80000h-9FFFFh is on" Choice "System Board B4h - XXX1XXXX" pos[0]=XXX1XXXXb Choice "I/O Channel B4h - XXX0XXXX" pos[0]=XXX0XXXXb Help "No help is available on this item." NamedItem Cmos 45h ChipReg B5h Prompt "Enable Shadow RAM at C0000h-CFFFFh" Choice "RAM enabled B5h - XX1XXXXX" pos[0]=XX1XXXXXb Choice "ROM enabled B5h - XX0XXXXX" pos[0]=XX0XXXXXb Help "No help is available on this item." NamedItem Cmos 45h ChipReg B5h Prompt "Write Protect RAM at C0000h-CFFFFh" Choice "Write enabled B5h - 0XXXXXXX" pos[0]=0XXXXXXXb Choice "Write disabled B5h - 1XXXXXXX" pos[0]=1XXXXXXXb Help "No help is available on this item." NamedItem Cmos 45h ChipReg B5h Prompt "Enable Shadow RAM at D0000h-DFFFFh" Choice "RAM enabled B5h - XXX1XXXX" pos[0]=XXX1XXXXb Choice "ROM enabled B5h - XXX0XXXX" pos[0]=XXX0XXXXb Help "No help is available on this item." NamedItem Cmos 45h ChipReg B5h Prompt "Write Protect RAM at D0000h-DFFFFh" Choice "Write enabled B5h - X0XXXXXX" pos[0]=X0XXXXXXb Choice "Write disabled B5h - X1XXXXXX" pos[0]=X1XXXXXXb Help "No help is available on this item." NamedItem Cmos 7Ah Prompt "Dynamic Memory Determination" Choice "Enabled. " pos[0]=XXXXX1XXb Choice "Disabled. (Use B9 register)" pos[0]=XXXXX0XXb Help " When Enabled the ROM BIOS will automatically sense the amount of memory, and ignore the settings for the B9 register in CMOS. If this feature is disabled ROM BIOS will ignore the actual memory size and use the CMOS value for the B9 register." NamedItem Cmos 48h ChipReg B9h Prompt "Memory size" Choice "1Mb (1-256) B9h - 100000XX" pos[0]=100000XXb Choice "2Mb (2-256) B9h - 101000XX" pos[0]=101000XXb Choice "3Mb (3-256) B9h - 101100XX" pos[0]=101100XXb Choice "4Mb (4-256) B9h - 101101XX" pos[0]=101101XXb Choice "6Mb (2-256/1-1MB) B9h - 101110XX" pos[0]=101110XXb Choice "10Mb (2-256/2-1MB) B9h - 101111XX" pos[0]=101111XXb Choice "5Mb (1-256/1-1MB) B9h - 011000XX" pos[0]=011000XXb Choice "4Mb (1-1MB) B9h - 110000XX" pos[0]=110000XXb Choice "8Mb (2-1MB) B9h - 111000XX" pos[0]=111000XXb Choice "12Mb (3-1MB) B9h - 111110XX" pos[0]=111110XXb Choice "16Mb (4-1MB) B9h - 111111XX" pos[0]=111111XXb Help "Select the number of 256Kb SIMMs and 1MB SIMMs on the board." NamedItem Cmos 48h ChipReg B9h Prompt "Fast timeout" Choice "Disabled B9h - XXXXXXX0" pos[0]=XXXXXXX0b Choice "Enabled B9h - XXXXXXX1" pos[0]=XXXXXXX1b Help "When enabled this causes -RAS precharge during I/O or idle cycles." NamedItem Cmos 48h ChipReg B9h Prompt "Number of -RAS precharge cycles" Choice "3 CPU CLK2 B9h - XXXXXX0X" pos[0]=XXXXXX0Xb Choice "5 CPU CLK2 B9h - XXXXXX1X" pos[0]=XXXXXX1Xb Help "This is valid only if the 'Fast timeout' is enabled." NamedItem Cmos 49h ChipReg BAh Prompt "EMS memory access wait states" Choice "1 BAh - XXXX1XXX" pos[0]=XXXX1XXXb Choice "0 BAh - XXXX0XXX" pos[0]=XXXX0XXXb Help "One wait state at 16Mhz is 125ns, at 20Mhz 100ns, and at 25Mhz 120ns." NamedItem Cmos 49h ChipReg BAh Prompt "EMS enable" Choice.BUG /NUL / i$q$y$$..&&.6&&(&,F2&D&D!!&De&>[& B6F&0&0&H&$Z&+FH^Ȧȥȥȥ89:;<= >?@ABCD EFGHI J K NOVW XZ[P\$!efhgl  P i       P  ! TVR2 U W S $&'Z       ! " 2 #$ "$l z''(((&-'$$%(( /l) 11 )000)( (( (11)( !00} oy   3G33t~Ƈ<4ـ2z{{tyt2k2 (!!#{? j|7(l <>N~4~"4~0 B f'hsq#CisA>?&?)>#kq>####qBsv}5Ue"pC}7RV>#-##~##$ $7$<$c$MS DOS Version 4.00 (C)Copyright 1988 Microsoft CorpLicensed Material - Property of Microsoft &*##NO NAME  NamedItem Cmos 54h ChipReg BFh Prompt "Page mode RAS time-out counter" Choice "Disabled BFh - XXXXX0XX" pos[0]=XXXXX0XXb Choice "Enabled BFh - XXXXX1XX" pos[0]=XXXXX1XXb Help "No help is available on this item."