AdapterId 0EEFFh

AdapterName  "IBM Dual Async Adapter"

NumBytes 1

Begin Device 6 0 0
NamedItem
	Prompt "Connector 1"
      choice "SERIAL 1"  pos[0]=XXXX000Xb  io 03f8h-03ffh  int 4
      choice "SERIAL 2"  pos[0]=XXXX001Xb  io 02f8h-02ffh  int 3
      choice "SERIAL 3"  pos[0]=XXXX010Xb  io 3220h-3227h  int 3
      choice "SERIAL 4"  pos[0]=XXXX011Xb  io 3228h-322fh  int 3
      choice "SERIAL 5"  pos[0]=XXXX100Xb  io 4220h-4227h  int 3
      choice "SERIAL 6"  pos[0]=XXXX101Xb  io 4228h-422fh  int 3
      choice "SERIAL 7"  pos[0]=XXXX110Xb  io 5220h-5227h  int 3
      choice "SERIAL 8"  pos[0]=XXXX111Xb  io 5228h-522fh  int 3
   Help
"The IBM Dual Async Adapter can be set as Serial 1 through 8.
If you are in the 'Change Configuration' window, you can change
the setting.  Use F5 and F6 to scroll through the choices.
If a setting conflicts with another, an asterisk (*) appears next to
the conflicts.	You must fix conflicts before you use the adapter.
Use the Up and Down arrow keys to move from field to field.
(If you are not in the 'Change Configuration' window and you need
to change the setting, return to the 'Set Configuration' window then
select 'Change configuration'.)"

End
Begin Device 6 0 0
NamedItem
	Prompt "Connector 2"
      choice "SERIAL 1"  pos[0]=1000XXXXb  io 03f8h-03ffh  int 4
      choice "SERIAL 2"  pos[0]=1001XXXXb  io 02f8h-02ffh  int 3
      choice "SERIAL 3"  pos[0]=1010XXXXb  io 3220h-3227h  int 3
      choice "SERIAL 4"  pos[0]=1011XXXXb  io 3228h-322fh  int 3
      choice "SERIAL 5"  pos[0]=1100XXXXb  io 4220h-4227h  int 3
      choice "SERIAL 6"  pos[0]=1101XXXXb  io 4228h-422fh  int 3
      choice "SERIAL 7"  pos[0]=1110XXXXb  io 5220h-5227h  int 3
      choice "SERIAL 8"  pos[0]=1111XXXXb  io 5228h-522fh  int 3
   Help
"The IBM Dual Async Adapter can be set as Serial 1 through 8.
If you are in the 'Change Configuration' window, you can change
the setting.  Use F5 and F6 to scroll through the choices.
If a setting conflicts with another, an asterisk (*) appears next to
the conflicts.	You must fix conflicts before you use the adapter.
Use the Up and Down arrow keys to move from field to field.
(If you are not in the 'Change Configuration' window and you need
to change the setting, return to the 'Set Configuration' window then
select 'Change configuration'.)"
End