Sigma Data "Quick Easy Disk" Adapter / Model 70

I really do not like those darn snaps that are used in the 50 and 70...especially when I don't have the tool handy!

Sigma Data is still around. They sell assorted hard disk and memory upgrades these days. Most of their current product lineup looks to be ThinkPad oriented.Their support site does have files for nearly all of their products. Believe it or not, this includes the QED adapter.

Because companies don't always last forever, you can also get the drivers here. I also have the QED/5Z-XXXX (for 50Z?) and QED/68-XXXX (standalone MCA IDE adapter) files here. Drivers are for OS/2 and MS or PC-DOS. You download them strictly at your own risk. I can't take any responsibility for any result of using these files.

Quick Easy Disk PCB

U1 - Lattice 20L8BNCS PAL
U2 - Texas Instruments 16L8 PAL -15
U3 - Samsung 74HCTLS174N
U4 - Samsung 74HCTLS174N
U5 - Lattice PAL 16L8BCN PAL
U6 - Samsung 74HCTLS245N
U7 - Samsung 74HCTLS245N

Grey items are populated on the reverse side of the adapter. P2 is the "floppy disk A" connector and is the standard "edgecard" type.

Quick Easy Disk Backside

J1 - IDE Connector
P2 - Reverse of floppy connector
P3 - Power +5 -5 -12 +12 in that order.

The Model 70 power supply does not have an overabundance of capacity. DO NOT use a high power draw drive with this adapter. Stay under 500mA on both +5 and +12V if you can. Remember, this adapter supplements your DBA ESDI it is still drawing power, along with any optional memory cards, NICs, CPU upgrades or video cards you may have installed. With only 132 watts of power available at best, it might not take long to get into trouble with your power supply or planar.

P4 - DBA ESDI connector
JP 1 & 2 - no idea - I will have to ask Sigma Data and see if they know.

The hard disk included with mine is marked as a "Quick Easy Disk Part # QED70/120, S/N 10046" It is a Maxtor 3.5" 7120AT IDE hard disk.

This is a real simple IDE adapter. I doubt very much that it is bootable. There is no onboard ROM and it does not have a card-ID. The computer it is installed in boots into OS/2 Warp 3 and loads a Sigma Data supplied device driver to allow access to the drive. At this time, the computer locks up when trying to initialize the drive. I have not yet determined if this is a problem with the drive itself or the controller board. For now, bypassing the device driver works although I cannot use the drive that way.

This is probably supported under DOS, Win 3.x and OS/2 only--not for Win95 or NT, as usual... Ah well...

Go Back>

Copyright © 2005 by William R. Walsh. All Rights Reserved. This page may be reproduced freely in its original form with all copyright noticies present and unaltered as long as no charge is assessed for providing this information, other than reasonable charges for duplicating, media cost, or connection/access time.